国产精品理论片在线播放-精品国产av一区二区麻豆-久久久久久国产精品久久-亚洲日本精品麻豆一区国产

Home / Product

Product

Stop

Stop valve

Nominal pressure:PN1.6~16.0MPa
Nominal diameter:DN15~400mm

1. The product has reasonable structure, reliable sealing, excellent performance and beautiful appearance.

2. Sealing surface surfacing Co based cemented carbide, wear resistance, corrosion resistance, abrasion resistance, long service life.

3. The valve stem has good corrosion resistance and abrasion resistance after tempering and surface nitriding treatment.

4. The nominal pressure ≥25.0MPa(Class 1500) cavity adopts self-tightening sealing structure, and the sealing performance is enhanced with the increase of pressure to ensure the sealing performance.

5. The valve is equipped with reverse sealing structure, reliable sealing.

6. The material and flange of the parts and the size of the butt welding end can be reasonably selected according to the actual working conditions or user requirements to meet various engineering needs.


Product description

The stop valve is used to close, open and throttle the pipeline medium. The stop valve can completely block the fluid and form a good seal under the force of the valve stem. Is a very widely used valve, it is popular because of the small friction between the sealing surface in the opening and closing process, the sealing is by applying torque to the valve stem, the valve stem exerts pressure on the valve disc in the axial direction, so that the valve disc sealing surface and the valve seat sealing surface are closely fitted, preventing the medium from leaking along the gap between the sealing surface. Relatively durable, opening height is not large, easy to manufacture, convenient maintenance, not only suitable for low and medium pressure, but also suitable for high pressure.


Working principle

The globe valve depends on rotating the handwheel to make the stem rise and fall, and drive the valve disc to make a straight line displacement parallel to the medium flow direction to achieve the purpose of opening and closing. The handwheel rotates clockwise, and the working medium enters through the channel below the valve. At this time, the applied sealing force must be equal to or greater than the sum of the specific pressure generated on the sealing surface and the upward force of the medium. When the globe valve is opened, the opening height of the valve disc is 25% to 30% of the nominal diameter, and the flow rate has reached the maximum, indicating that the valve has reached the fully open position. Therefore, the full open position of the globe valve should be determined by the stroke of the valve disc.